speed of sound

Speed of sound

U.S. Navy F/A-18 breaking the sound barrier. The white halo is formed by condensed water droplets which are thought to result from a drop in air pressure around the aircraft (see Prandtl-Glauert Singularity).^[3][4]

Main article: Speed of sound

The speed of sound depends on the medium through which the waves are passing, and is often quoted as a fundamental property of the material. In general, the speed of sound is proportional to the square root of the ratio of the elastic modulus (stiffness) of the medium to its density. Those physical properties and the speed of sound change with ambient conditions. For example, the speed of sound in gases depends on temperature. In 20 °C (68 °F) air at the sea level, the speed of sound is approximately 343 m/s (1,230 km/h; 767 mph) using the formula "v = (331 + 0.6T) m/s". In fresh water, also at 20 °C, the speed of sound is approximately 1,482 m/s (5,335 km/h; 3,315 mph). In steel, the speed of sound is about 5,960 m/s (21,460 km/h; 13,330 mph).^[5] The speed of sound is also slightly sensitive (a second-order anharmonic effect) to the sound amplitude, which means that there are nonlinear propagation effects, such as the production of harmonics and mixed tones not present in the original sound (see parametric array).

sound wave properties and characteristics

Sound wave properties and characteristics

Sound waves are characterized by the generic properties of waves, which are frequency, wavelength, period, amplitude, intensity, speed, and direction (sometimes speed and direction are combined as a velocity vector, or wavelength and direction are combined as a wave vector).

Transverse waves, also known as shear waves, have an additional property of polarization.

Sound characteristics can depend on the type of sound waves (longitudinal versus transverse) as well as on the physical properties of the transmission medium^{[citation needed]}.

Whenever the pitch of the sound wave is affected by some kind of change, the distance between the sound wave maxima also changes, resulting in a change of frequency. When the loudness of a sound wave changes, so does the amount of compression in air of the wave that is traveling through it, which in turn can be defined as amplitude.

longitudinal and tranverse waves

Longitudinal and transverse waves

Sinusoidal waves of various frequencies; the bottom waves have higher frequencies than those above. The horizontal axis represents time.

Sound is transmitted through gases, plasma, and liquids as longitudinal waves, also called compression waves. Through solids, however, it can be transmitted as both longitudinal and transverse waves. Longitudinal sound waves are waves of alternating pressure deviations from the equilibrium pressure, causing local regions of compression and rarefaction, while transverse waves in solids, are waves of alternating shear stress.

Matter in the medium is periodically displaced by a sound wave, and thus oscillates. The energy carried by the sound wave converts back and forth between the potential energy of the extra compression (in case of longitudinal waves) or lateral displacement strain (in case of transverse waves) of the matter and the kinetic energy of the oscillations of the medium.

physics of sond

Physics of sound

The mechanical vibrations that can be interpreted as sound are able to travel through all forms of matter: gases, liquids, solids, and plasmas. The matter that supports the sound is called the medium. Sound cannot travel through vacuum.

ligth and sound experiment

Instructions1. Print the picture shown or make your own on paper.2. Glue the picture on some cardboard and allow to dry.3. Piece the middle of the disc with a nail.4. Insert the pencil through the whole and spin the disc.5. What colour do you see?
Back to light and sound experiments
You will need:- Coloured pens, or a colour printer, plus paper.- 1 Nail, pencil, cardboard and glue.
White light is comprised of all the colours of the visible spectrum.More on light by Museum Victoria.i.e. red, orange, yellow, green, blue, indigo and violet... as well as the shades in between.Spinning the disc mixed all the different wavelengths of coloured light together, creating white light. The faster you move the disc, the more white light you see. This process is call colour addition.Colour subtraction occurs when substances that absorb light, such as paint, are mixed together. Mixing coloured paint eventually produces black paint, whereby all visible ligh